Foxboro | FCP280 | Field Control Processor 280 | Brand New

The Specifications of FCP280 Field Control Processor 280:

Processor Type:

• Control Processor: ARM® System on a Chip (SOC)
• Memory:
  • 128 MB SDRAM
  • 128 MB Flash Memory
• Error Detection: ECC for single-bit error correction and multiple-bit error detection

Process I/O Communications:

• Fieldbus Type: HDLC
• Transmission Rate:
  • 2 Mbps for 200 Series FBMs
  • 268 Kbps for 100 Series FBMs

Process I/O Capacity:

• 200 Series FBMs:
  • Up to 32 per Expanded Fieldbus
  • Up to 128 FBMs over all four Expanded Fieldbuses with 200 Series FBMs
  • Mixed with 100 Series FBMs: Up to 128 FBMs, e.g., 64 100 Series and 64 200 Series FBMs
• 100 Series FBMs:
  • 64 FBMs per PIO bus/baseplate port
  • Total of 128 FBMs per FCP280
• Competitive Migration Modules: Refer to device-specific Product Specification Sheets

Memory Allocation for Blocks:

• Classic OLUG: 15.75 MB
• Enhanced OLUG: 19.75 MB

Maximum Number of Blocks Configured:

• Total: 8,000 (7,993 user-configured)

Block Executions Per Second:

• Maximum: 16,000 blocks/second

Maximum Number of Blocks Processed:

• Depends on: Scan periods and block type selection

Minimum Block Processing Cycle (BPC):

• Time: 50 ms

Sequence Block Size:

• Maximum: 32 kB per block

Maximum Number of IPC Connections:

• Total: 231
  • 200 Source Points
  • 30 Sink Points
  • 1 Internal Use Only

Maximum Number of OM Sink Lists:

• Total: 75

Maximum OM Scanner Database:

• BPC ≥ 200 ms: 18,000 points
• BPC ≤ 100 ms: 7,500 points

Maximum Number of OM Sink Points:

• Total: 11,250

Configurable Block Periods:

• Seconds: 0.05, 0.1, 0.2, 0.5, 0.6, 1, 2, 5, 6, 10, 30
• Minutes: 1, 10, 60

Block Processing Cycle:

• Options: 0.05, 0.1, 0.2, 0.5, 1.0 seconds

Time to Marry Fault-Tolerant Modules:

• Less Than: 0.5 seconds

Internal Diagnostics:

• Self-Checking: At power-up
• Run-Time Checks: Includes watchdog timer and constant synchronization in fault-tolerant mode

Power Requirements:

• Input Voltage: 24 V DC (Redundant)
• Consumption:
  • Single Module: 11 W maximum
  • Fault-Tolerant Pair: 20 W maximum

Regulatory Compliance and EMC:

• EMC Directive 2014/30/EU: EN 61326-1 Class A

Environmental Specifications:

• Operating Temperature: -20 to 60°C (-4 to 140°F)
• Storage Temperature: -40 to +70°C (-40 to +158°F)
• Relative Humidity: 5 to 95% (Non-condensing)
• Altitude:
  • Operating: -300 to +3,000 m (-1,000 to +10,000 ft)
  • Storage: -300 to +12,000 m (-1,000 to +40,000 ft)
• Contamination Class: G3 (Harsh)
• Vibration: 0.5 g (5 to 500 Hz)

Physical Specifications:

• Configuration:
  • Single processor module
  • Fault-tolerant version: Two processor modules with integral fault-tolerant connector
• Mounting: Device-specific 2-position baseplates (horizontal or vertical)
• Dimensions:
  • Height: 105 mm (4.13 in) or 116 mm (4.7 in)
  • Width: 51.8 mm (2.04 in)
  • Depth: 147 mm (5.79 in)
• Weight (Maximum): 0.8 kg (1.76 lb)

Part Numbers:

• FCP280: RH924YA
• Baseplates:
  • Horizontal-Mounted: RH924YL
  • Vertical-Mounted: RH924YF
  • Dual Cable: RH100JX
• Adapters:
  • Fiber: RH924WA
  • Copper: RH924UQ
  • Splitter Adapters: RH928CV, RH924ZJ, RH928CY
  • Time Strobe Adapter: RH924ZQ

Ethernet Switch to FCP280 Cabling:

• Cabling Connectors:
  • Fiber Adapter: Ceramic LC connectors, MT-RJ
  • Copper Adapter: RJ-45 connectors
• Fiber Optic Cable: Multimode fiber (MMF) 62.5/125 µm plenum