GE Fanuc Field Control IC670MDL730 Output Module in Stock

The specifications for the GE Fanuc IC670MDL730 Output Module:

Module Characteristics:

• User Input Voltage: 18-30 VDC, 24 VDC nominal
• Output Voltage Range: 17.5 VDC to 29.5 VDC
• Continuous Load Current:
  • 2.0 Amps maximum per point
  • 8 Amps maximum per module
• Outputs per module: 8
• Indicators:
  • Individual point status (green)
  • Individual fault status (yellow, On = fault)
  • Internal 5V status from BIU and external supply (green)
• Isolation:
  • User terminal to logic, User terminal to frame ground, Group to group: 250 VAC continuous, 1500 VAC for 1 minute.
  • No isolation between individual points in a group.
• Current Drawn from Bus Interface Unit Power Supply: 125 mA maximum

Output Characteristics:

• Inrush Current per point: 10 Amps maximum for 10 ms
• Steady State Overcurrent Trip Point: Nominal range 2.25 Amps-2.75 Amps
• Output Voltage Drop: 0.5 volt maximum
• Output Leakage Current: 0.5 mA at 30 VDC maximum
• Response Time-On: 500 μs maximum
• Response Time-Off: 500 μs maximum
• Short circuit response time: 20 Amps for 100 μs
• Time between retries: 1.5 ms maximum
• Protection (each output): Short Circuit protection, Overcurrent protection, MOV