Rockwell ProSoft PLX31-EIP-MBS EtherNet/IP To Modbus Serial Gateway

Technical specifications for the ProSoft PLX31-EIP-MBS Modbus:

Power Supply:

• 24 VDC nominal (10 to 36 VDC allowed)
• Positive, Negative, GND Terminals
• Current Load:
  • 24 VDC nominal @ 300 mA
  • 10 to 36 VDC @ 610 mA maximum

Operating Conditions:

• Temperature: -25°C to 70°C (-13°F to 158°F)
• Storage Temperature: -40°C to 80°C (-40°F to 176°F)
• Shock: IEC 60068-2-27; 15G @ 11ms, 3-Axis (Operational), 30G @ 18ms, 3-Axis (Non-Operational)
• Vibration: IEC 60068-2-6; 5G @ 10 to 150 Hz
• Relative Humidity: 5% to 95% RH with no condensation

Dimensions:

• Height x Width x Depth: 5.38 x 1.99 x 4.38 in (13.67 x 5.05 x 11.13 cm)

LED Indicators:

• Configuration (CFG), Error (ERR), Power (PWR), Hardware Fault (FLT), Network Status (NS), EtherNet/IP™ Class I or Class III Connection Status (EtherNet/IP Only), Module Status (MS), Module Configuration Status (EtherNet/IP Only)

Ethernet Communication Port:

• Link/Activity, and 100 Mbit
• RJ45 Connector
• 10/100Mbit full- and half-duplex

Features:

• Data prioritization: Multiple I/O connections enable setting RPIs for status and/or control data, optimizing Ethernet bandwidth.
• Embedded EDS Add-On Profile: Simplifies integration and reduces commissioning time.
• SD Card Slot: Allows for optional SD card insertion for storing configuration files, facilitating disaster recovery.
• ProSoft Discovery Service: Utility enables your PC to detect the gateway and change its default IP address without needing to be on the same subnet.
• Secure module configuration: Available via module switch (v1.04 and greater).
• Large Data Exchange: Supports up to 10,000 16-bit registers, facilitating the exchange of large amounts of data.